Robeslee Concrete Lintel PS Type D 150x100x900mm

Robeslee 150x100x900mm Concrete Lintel PS Type D

This is a special order lintel only available in Scotland, plerase confirm availability with your branch

The D type is designed to withstand direct imposed loads.

Features and Benefits:

• Grade 50 concrete
• Fire resistance 1 hour
• Bearing: Minimum of 150mm each side or as directed by the structural engineer.
• Propping: Propping is not required with this type of lintel.
• Brickwork: Non-composite lintels do not require brickwork bonded to them. Point loads from girders, trusses, steel beams ect. require to be referred to our Customer Advisory Service.
• Positioning: Lintels must be placed with wire in correct position. Lintels are marked top.
• Robeslee Lintels are designed in accordance with – BS 5977: Part 1: 1981, BS 5977: Part 2: 1983, BS 8110: Part 1: 1985, BS 8110: Part 2: 1985

Technical Specifications

Documents

• Robeslee 150x100x900mm Concrete Lintel PS Type D - Non-Composite Load Table (781.12 KB)
• Robeslee 150x100x900mm Concrete Lintel PS Type D - Robeslee Concrete Data Sheet (2.37 MB)